CableModE-Series Pro ModFlex Sleeved Cable Kit for EVGA G/G+ / P/P+ / T (White)

Bought TWO kits. One for my ASRock + 5800X build with Sapphire Nitro+ 6900XT, using Seasonic Prime 850W Ti PSU. Adds a bit of color and quality to the build. Looks nice. Feels like a quality product. Bought the second set in Blue and Black for my Asus Dark hero + 5950X build with Asus ROG 3080 Ti and Seasonic Prime 1000W Ti PSU.The main con is that the 8-pin PCIe power cables are stiff and hold a certain curve, and needed to be trained with extra combs to follow the curve that I wanted, such as when feeding them from below into my Sapphire 6900XT graphics card for good presentation (from below to keep the cables from covering the top plate RGB logo if feed from above). Didn't have an issue with pre-set curve going the wrong way when feeding the 3080 Ti from the top.The second con is that the kit only comes with 2x 8-pin PCIe cables, and since I wanted to use my Asus ROG 3080 Ti on my build I had to buy a 3rd PCIe power cable separately at extra cost. Fortunately the extra 8-pin bought separately has the same color order and thickness (bought xtra for each build just in case).My son has the same CableMod with black and white cables, and his 3rd "separate" 8-pin cable for his 3090 didn't perfectly match the color order and thickness of the two cables that came with his full kit. His cables were touching the glass on the side of the case, and after having to remove and replace a defective 3090 twice, along with the case glass pushing on the cables, his thinner "extra" PCIe cable went bad. He bought some of his cables last year, and that may explain the differences in cable thickness or color order.

For my build, this length was perfect and combs are high quality as well the sleeves on the individual wires, the 12VHPWR connector is fantastic and great quality as well. If you reading this pull the trigger and get yourself a set :D

Purchased in Back/Blood Red for the E-Series G3 / G2 / P2 / T2 (check their website for compatibility list)Pros:*All of the connectors appear to be of high quality*Cables & cable sleeves felt very well made & robust*Zero compatibility issues w/ my Super Flower Leadex Platinum SE 1000W PSU*Included combs really help to conform the cables to your particular setup or liking*Looks especially awesome with a customer water loop*Looks especially awesome with UV lights (ModMesh only)*Adds a unique and/or custom flare to your PC*CableMod offers great Customer ServiceCons:*Expensive*The ModMesh variant can be very stiff at first, which in turn can increase the time & effort it will take you to do proper cable management.*The combs on the PCI-e cables were a bit looser than expected in my kit.*Only includes two 8-pin PCI-e cables. If you have a 3080/3090 that takes 3x 8-pin connectors you may want to consider ordering an additional connector.Overall, I'm very happy I went ahead and decided to purchase these. Yes, they are somewhat expensive compared to other colored cable kits, but CableMod builds these cables right. Also, if you aren't keen to purchase the kit you can always try buying the 24-pin MB + 2x 8-pin PCI-e connectors separately.Bottom line: If you have the money to spare then I would definitely recommend buying this kit.

When it came to the point I had to make a new personal rig for myself, I watched plenty of build videos. A lot has changed since the last time I made a gaming PC. Hard drives got much smaller, coolers got more advanced, and motherboards and cases got way better.After watching several reviews I noticed everyone seemed to have sleeved PSU cables. After some research here we are. I used these replacement cables on a corsair HX850i. Please go to the cable mod website and make SURE you're ordering the correct replacement cables for your power supply or the results could be very bad and you'd be liable for it.Also when making this purchase, make sure the seller on amazon is cablemods USA.The cables look clean, they have adjustable combos on them to adjust the tightness of the cable at certain points. Probably could've used a few more included combs or had some more pre-installed to make the cable cleaner throughout. Instead you can make the front portion of the cable and some of it behind the case clean, but the furthest parts behind your case will get a tiny bit messy. Nothing to worry about you'd be zip-tying/velcro strapping them behind your case for some nice cable management.While these cables make your build look beautiful, I found them to be a little bit stiff. They were a challenge to get right for me personally - but this can vary from case to case. My main issue with this product is the poor labeling. It's most likely assumed that this product is for experienced builders but there's users like me who want a clean look and research far enough to get the right product only to be left with cables that have no labels, compared to the power supply provided cables which are properly labeled on one side (the one going into the PSU) which makes building much quicker.There was one cable that was labeled, but only one that I saw. I don't see why there wouldn't be simple one sided labeling on the cables like (PSU-CPU) indicating that's your CPU POWER cable, The cpu power cable has a certain look to it which can make it easily identifiable to an expert - but to a newbie it will take a little bit of back and fourth comparisons to get it right.Besides the labeling, all the cables came in a nice bag and the product works as intended. Clean look, no issues. Plenty of extra cables. The only down side is the price - but obviously work went into getting the cables to be like this so it's acceptable as labor. Thanks cable mods for the product, I hope in the future you can add some labeling to the cables - or better yet, just label the bags that they come in.

Honestly, if the OEM cables that came with the RM850x weren't so horribly stiff and janky looking i would not have gotten this cable set. That being said, the set of cables is really, really nice.Value for money: Reason I give 3 stars is well, because the PSU already has a set of cables. So this is a luxury item.Easy to install: If you have a small form factor case, good luck, These cables are long and, rather bulky. I have a Phanteks p600s case and can hide all the extra cable in the basement by the PSU.Style: They look great. No complaints from me

good normal kit for the price

Very nice cables and the fact they plug directly into the psu takes away concerns associated with daisy chaining a ton of cables. Expensive but you get what you pay for

excellent

I expected insane quality, but a 100 euros for this, is not worth it.Wish i bought cheaper (Extension cables)

Cable Mod sollte für viele im Bereich PC/PC Modding ein Bekannter Name sein. Die Qualität der Mod Mesh Kabel ab Netzteil ist super. Das Mod Mesh Material ist etwas steifer, daher sollte das Mainboard nicht zu Sicht an den Kabeldurchführungen sitzen. Durch das steife Material lassen sich schöne Bögen legen. Die Stecker zum Netzteil sind gut verarbeitet sie passen auf anhieb, alle Kontakte sitzen mittig. Das gleiche gilt für die Stecker zur Hardware.Wer es etwas weicher haben möchte sollte zum Mod Flex greifen.Bei Corsair Netzteilen darauf achten ob der Aufkleber auf dem Netzteil gelb oder schwarz ist. Cable Mod hat hier zwei Sets. (Black Label & Yellow Label).Die Sets gibt es mittlerweile auch mit 12VHPWR Stecker für RTX 3xxx/4xxx.Der Preis ist meiner Meinung nach absolut gerechtfertigt. Wer sein Gehäuse noch etwas aufwerten möchte sollte zugreifen.